Donnerstag, 8. Oktober 2015

The beginning


Communications Systems


  • We use here the router 2811, because it has more features.
  • For the connection between the different divices I use a Fast Ethernet Connection.
  • Between the routers there is a DCE Connection.

Steps:

  1. Click at the router and turn it off, than you must put the WIC-1T in the Slot.
  2. Switch the router on and repeat the steps with the different router.
  3.  Go to connections and select the DCE Serial wire.
  4. Click on the router and choose the serial Interface. 
 

Router Configurations:

1 Router:

Router>ena
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int fa0/0
Router(config-if)#ip ad
Router(config-if)#ip address 192.168.1.1 255.255.255.0
Router(config-if)#no shut
Router(config-if)#no shutdown

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#int s0/3/0
Router(config-if)#no shu
Router(config-if)#no shutdown

%LINK-5-CHANGED: Interface Serial0/3/0, changed state to down
Router(config-if)#ip add
Router(config-if)#ip address 192.168.3.1 255.255.255.0
Router(config-if)#clock rate 2000000
Router(config-if)#exit
%LINK-5-CHANGED: Interface Serial0/3/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/3/0, changed state to up

The running-config:


Router#show running-config

Building configuration...

Current configuration : 649 bytes
!
version 12.4
no service timestamps log datetime msec
no service timestamps debug datetime msec
no service password-encryption
!
hostname Router
!
!
!
!
!
!
!
!
no ip cef
no ipv6 cef
!
!
!
!
!
!
!
!
!
!
!
!
spanning-tree mode pvst
!
!
!
!
!
!
interface FastEthernet0/0
ip address 192.168.1.1 255.255.255.0
duplex auto
speed auto
!
interface FastEthernet0/1
no ip address
duplex auto
speed auto
shutdown
!
interface Serial0/3/0
ip address 192.168.2.1 255.255.255.0
clock rate 2000000
!
interface Vlan1
no ip address
shutdown
!
ip classless
!
ip flow-export version 9
!
!
!
!
!
!
!
line con 0
!
line aux 0
!
line vty 0 4
login
!
!
!
end


Note: I had some Errors with the packages. I couldn't find the error, but I  made it new!


  •  

Keine Kommentare:

Kommentar veröffentlichen